Using the latest high - stress - machine interface operating system of OMRON, and the software program, it has a good human-computer interaction performance.
The hydraulic system adopts BOSCH large flow rate, half closed proportional valve with high response and precision half closed control. The whole system has the characteristica of high response.low noise and energy comsumption.
The whole machine is a modular desing,the two sets of independentinjection system,accotding to the characteristics of plastic products for a variety of combinatios collecation,injechtion products range is very wide;
High percision rotating mode device,double station180degrees reciprocating rotation.the use of servo motor drive,shift mode fast,stable,smooth smooth accurate;
Two sets of independent proportional pressure/flow control circuit,control two sets of injection system and ejection system.according to the characteristics of plastic products,flexible and changeable set up the optimization of injection molding process,to ensure the quality of injection molding products,the end of the end of the cycle,and thus have a stronger market compititiveness.
Rotary table design,patricularly suitable for:single side cover injection molding"of the dual color plastic products,but also to use two sets of orkinary mold(mold thicknessas)at the same time to produce two different monochrome plastic products.
Using the latest high - stress - machine interface operating system of OMRON, and the software program, it has a good human-computer interaction performance.
The hydraulic system adopts BOSCH large flow rate, half closed proportional valve with high response and precision half closed control. The whole system has the
characteristics of high response, low noise and energy consumption.
The whole machine is a modular design, the two sets of independent injection system, according to the characteristics of plastic products for a variety of combinations collocation, injection products range is very wide.
High precision rotating mode device, double station 180 degrees reciprocating rotation, the use of servo motor drive, shift mode fast, stable, smooth, smooth, accurate.
Two sets of independent proportional pressure / flow control circuit, control two sets of injection system and ejection system, according to the characteristics of plastic products, flexible and changeable set up the optimization of injection molding process, to ensure the quality of injection molding products, the end of the cycle, and thus have a stronger market competitiveness.
Rotary table design, particularly suitable for "single side cover injection molding" of the dual color plastic products, but also to use two sets of ordinary mold (mold thickness
as) at the same time to produce two different monochrome plastic products.
When the firing rate of 201~280mm/s injection oil must be promoted to the high reaction direction control valve
When the firing rate of 281~800mm/s injection circuit must enhance control servo valve;
If you do not choose the servo valve, speed will be limited to less than 280mm/s.
We reserve the right to make changes as a result of further technical advantages.
|
Model
|
Company
|
CQL-180-2C
|
CQL-330-2C
|
CQL-430-2C
|
||||
|
The clamping device
|
Selection lnjection system
|
Series NO.
|
主射胶系统
|
副射胶系统
|
主射胶系统
|
副射胶系统
|
主射胶系统
|
副射胶系统
|
|
A.B C
|
A.B
|
B.C.D.E
|
A.B.C.D
|
C.D.E.F
|
B.C.D.E
|
|||
|
Clamping foce
|
kN(tf)
|
1764（180）
|
3234（330）
|
4124（430）
|
||||
|
Claming stroke
|
mm
|
600
|
85
|
950
|
||||
|
Minimum mold thickness
|
mm
|
220
|
280
|
350
|
||||
|
The maximum opening distanc
|
mm
|
820
|
1130
|
1300
|
||||
|
Column spacing(L*W)
|
mm
|
530*630
|
730*750
|
750*980
|
||||
|
The maximum size of the mold
|
mm
|
550*550
|
620*620
|
845*845
|
||||
|
The maximum size of the mold
|
KG
|
800
|
1000
|
1600
|
||||
|
Wheel diameter
|
mm
|
ф780
|
ф980
|
1200
|
||||
|
Finshed top of the distance
|
mm
|
150
|
180
|
200
|
||||
|
EJection
|
kN(tf)
|
59（6）
|
78.5（8）
|
122.5（12.5）
|
||||
|
Other
|
System pressure
|
MPA(kgf/cm2)
|
17.5（175）
|
17.2（175）
|
17.2（175）
|
|||
|
Fuel tank capacity
|
L
|
400
|
780
|
930
|
||||
|
Motor Power
|
KW(HP)
|
30（40）
|
45（60）
|
55（75）
|
||||
|
Mechanical Dimensions
|
mm
|
5668*2935*2130
|
7610*3795*2420
|
8215*4395*2670
|
||||
|
Machine weight
|
tf
|
13
|
24.5
|
34Primary injection systemPrimary injection system
|
||||
|
Model
|
Company
|
A
|
B
|
C
|
D
|
E
|
F
|
|||||||||||||
|
CQL-2C(The injection device
|
Screw diameter
|
mm
|
Φ25
|
Φ30
|
Φ35
|
Φ30
|
Φ35
|
Φ40
|
Φ35
|
Φ40
|
Φ45
|
Φ40
|
Φ45
|
Φ50
|
Φ45
|
Φ50
|
Φ55
|
Φ60
|
Φ65
|
Φ70
|
|
Theoretical injection volume
|
cm3
|
69
|
99
|
135
|
113
|
154
|
201
|
154
|
350
|
432
|
276
|
350
|
432
|
381
|
471
|
570
|
848
|
995
|
1154
|
|
|
Injection molding quality (PS)
|
g(oz)
|
64(2.2)
|
93(3.2)
|
126(4.4)
|
105(3.7)
|
143(5)
|
187(6.6)
|
143(5)
|
187(6.6)
|
236(8.3)
|
257(9)
|
325(11.5)
|
402(14)
|
335(12.5)
|
438(15.4)
|
530(18.6)
|
788(27.8)
|
925(32.6)
|
1073(37.8)
|
|
|
Plastic ability
|
g/s
|
6
|
9
|
15
|
12.3
|
18.8
|
26.8
|
15
|
21.4
|
27.6
|
21.4
|
27.6
|
35.2
|
18.6
|
23.7
|
29.1
|
37.4
|
45.4
|
54.5
|
|
|
Injection rate
|
cm3/s
|
286(2912)
|
198(2022)
|
146(1485)
|
267(2722)
|
196(2000)
|
150(1530)
|
245(2494)
|
193(1970)
|
156(1596)
|
245(2494)
|
193(1970)
|
156(1596)
|
244(2489)
|
198(2016)
|
163(1666)
|
198(2022)
|
169(1723)
|
146(1486)
|
|
|
Injection rate
|
mm/s
|
COL180-2C/179
|
CQL180-2C/ 133
|
CQL330-2C / 259
|
CQL330-2C/ 159
|
CQL430-2C / 187
|
CQL330-2C / 159
|
CQL430-2C/ 187
|
CQL330-2C/ 126
|
CQL430-2C / 148
|
CQL430-2C / 88
|
|||||||||
|
Maximum injection pressure
|
Mpa(kgf/cm2)
|
COL180-2C / 123
|
COL330-2C/225
|
CQL180-2C 91
|
CQL-2C 167
|
CQL430-2C 210
|
CQL330-2C/103
|
CQL430-2C /129
|
CQL330-2C / 103
|
CQL430-2C/129
|
CQL330-2C / 102
|
_______
|
||||||||
|
Screw speed
|
r.p.m
|
0~240
|
0~300
|
0~240
|
0~240
|
0~160
|
0~160
|
|||||||||||||
|
Nozzle projecting template size
|
mm
|
≥45
|
≥45
|
≥45
|
≥45
|
≥45
|
≥45
|
|||||||||||||
|
Electric heating power
|
kw
|
5.7
|
6.9
|
10
|
12.1
|
13
|
21
|
|||||||||||||
Dongguan Wotboy Intelligent Equipment Co.,Ltd.
Tel：0769-87896501 Fax：0769-87896503
Email：baina@bainajx.com
Address：Dongguan Suyin Qingxi Town of third road management areas
