Horizontal two-color machine

Using the latest high - stress - machine interface operating system of OMRON, and the software program, it has a good human-computer interaction performance.
The hydraulic system adopts BOSCH large flow rate, half closed proportional valve with high response and precision half closed control. The whole system has the
characteristics of high response, low noise and energy consumption.
The whole machine is a modular design, the two sets of independent injection system, according to the characteristics of plastic products for a variety of combinations collocation, injection products range is very wide.
High precision rotating mode device, double station 180 degrees reciprocating rotation, the use of servo motor drive, shift mode fast, stable, smooth, smooth, accurate.
Two sets of independent proportional pressure / flow control circuit, control two sets of injection system and ejection system, according to the characteristics of plastic products, flexible and changeable set up the optimization of injection molding process, to ensure the quality of injection molding products, the end of the cycle, and thus have a stronger market competitiveness.
Rotary table design, particularly suitable for "single side cover injection molding" of the dual color plastic products, but also to use two sets of ordinary mold (mold thickness
as) at the same time to produce two different monochrome plastic products.

Model	Company	CQ170-2C						CQ250-2C						CQ290-2C
		Note1			Note 2			Note 1			Note 2			Note1			Note 2
INJECTION UNIT		A	B	C	A	B	C	A	B	C	A	B	C	A	B	C	A	B	C
Screw Diameter	mm	32	36	40	26	30	34	40	45	50	32	36	40	40	45	50	32	36	40
Shot Size (Theoretical)	L/D	22.5	20	18	24	21	19	22.5	20	18.8	21.5	20	18	22.5	20	18.8	21.5	20	18
Injection Weight(PS)	cm3	122	155	191	66	88	113	251	318	393	122	155	191	251	318	393	122	155	191
Injection Rate	g	111	141	174	60	80	103	228	289	358	111	141	174	228	289	358	111	141	174
Injection Pressure	g/s	76	96	118	61	81	104	111	141	174	75	95	117	111	141	174	75	95	117
Plasticizing Capacity(ps)	MPa	225	178	144	237	178	138	225	178	144	225	178	144	225	178	144	225	178	144
Screw Speed	g/s	10	11.6	14	7.8	12.7	17	18.9	25	34	10	11.6	14	18.9	25	34	10	11.6	14
CLAMPING UNIT	rpm	0~240			0~285			0~210			0~240			0~210			0~240
Clamp Tonnage	TON	170						250						290
Toggle Stroke	mm	420						540						590
Space Between Tie Bars	mm	455X455						570X570						630X630
Max.Mold Height	mm	485						570						630
Min.Mold Height	mm	165						220						230
Ejector Stroke	mm	120						120						70
Ejector Number	KN	14X2						28X2						22X4
Core AxisStroke	PC	1X2						1X2						2X2
CoreAxiaTonnage	mm	120						120						120
DistanceBetween Molds Positing Centers	KN	33						46						46
OTHERS	mm	25						300						300
Max.PumpPressure		11		16		7.5		15		16		11		15		16		11
Pump MotorPower	MPa	9.9				5.1		12.25				9.9		12.25				9.9
Heater Power	KW
Machine Weight	KW	25		5.5		25		25		10		25		25		11		25
Hopper Capacity	t
OilTankCapacity	KG	281						384						545